PP熔噴濾芯
Product Description
Taiwan Shu Chiang Melt Blown Filter.
The depth filter cartridge was manufactured by four different pore diameter of spray nozzle. The four-layers structure PP depth cartridge is functioned with fine fibers in inner layer and coarse fibers in outer layer which constitutes four different pore diameter in order to filtrate particles in different layer. This design has high contaminant holding capacity, which also ensures a longer service life and lower pressure drop.
Features & Benefits
Four-layers structure cartridge, high contaminant holding capacity, long filter service life.
100% PP for compatibility with a wide range of process fluids.
Micro-Denier melt-blown filtration fiber, high removal ratings.
Formed by thermal bond without use of any binders and adhesives.
In compliance with EU Directive 2002/72/EC for plastic in food contact.
Application of product
Filtration of etching and image development process solutions in PCB industry.
Filtration for electroplating fluids in conventional electroplating industry.
Pre-filtration of DI & RO water filtration system for industry usage.
Filtration of low viscosity chemical fluids.
Filtration of process water and recycled water.
.jpg)
Taiwan Shu Chiang Melt Blown Filter.
The depth filter cartridge was manufactured by four different pore diameter of spray nozzle. The four-layers structure PP depth cartridge is functioned with fine fibers in inner layer and coarse fibers in outer layer which constitutes four different pore diameter in order to filtrate particles in different layer. This design has high contaminant holding capacity, which also ensures a longer service life and lower pressure drop.
Features & Benefits
Four-layers structure cartridge, high contaminant holding capacity, long filter service life.
100% PP for compatibility with a wide range of process fluids.
Micro-Denier melt-blown filtration fiber, high removal ratings.
Formed by thermal bond without use of any binders and adhesives.
In compliance with EU Directive 2002/72/EC for plastic in food contact.
.jpg) |
 |
 |
Application of product
Filtration of etching and image development process solutions in PCB industry.
Filtration for electroplating fluids in conventional electroplating industry.
Pre-filtration of DI & RO water filtration system for industry usage.
Filtration of low viscosity chemical fluids.
Filtration of process water and recycled water.
| Micron ratings | 0.5, 1, 3, 5, 10, 25, 50, 75, 100 Micron |
| Material of construction | 100% PP Melt-Blown Micro Fiber |
| Length | 9.87'', 10'', 20'', 30'', 40'' (251mm, 254mm, 508mm, 762mm, 1016mm) |
| Inner diameter | 28mm ± 1mm |
| Outer diameter | 63mm / 114mm ± 1mm |
| Maximum operating temperature | 80 degrees Celsius. |
| End Caps | Polypropylene |